[LW] [LW11] Converting issues changing from C120 to AxiomPro 9
|
04-30-19, 09:10 AM
Post: #4
|
|||
|
|||
RE: [LW11] Converting issues changing from C120 to AxiomPro 9
Dear ALK310,
You can send the ST70 to us for a software update, you can book this in online here. The NMEA0183 port needs to be set to 38400 baud rate, this will then recieve the NMEA0183 sentences and targets will be displayed on the Axiom Pro. DO ensure Port 2 is set to this. Have you connected the AIS NMEA out port to the Correct wires on the Axiom Pro? Port 2 is; Orange/ White in + Orange/ Green in - Is the AIS transceiver operating? Have you look on another AIS system to see if you are transmitting? It may be an idea to an authorised Raymarine dealer onboard, you can locate your nearest one via our website here. Many Thanks Louise |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[LW11] Converting issues changing from C120 to AxiomPro 9 - AKL310 - 04-24-19, 01:58 PM
RE: [LW11] Converting issues changing from C120 to AxiomPro 9 - Louise - Raymarine - Moderator - 04-26-19, 09:26 AM
RE: [LW11] Converting issues changing from C120 to AxiomPro 9 - AKL310 - 04-27-19, 02:52 PM
RE: [LW11] Converting issues changing from C120 to AxiomPro 9 - Louise - Raymarine - Moderator - 04-30-19 09:10 AM
RE: [LW11] Converting issues changing from C120 to AxiomPro 9 - AKL310 - 05-02-19, 03:11 AM
RE: [LW11] Converting issues changing from C120 to AxiomPro 9 - Louise - Raymarine - Moderator - 05-02-19, 08:01 AM
RE: [LW11] Converting issues changing from C120 to AxiomPro 9 - AKL310 - 05-02-19, 02:04 PM
RE: [LW11] Converting issues changing from C120 to AxiomPro 9 - Louise - Raymarine - Moderator - 05-03-19, 09:46 AM
|
User(s) browsing this thread: 2 Guest(s)