Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Smart Pilot melted 2A fuse, blown board

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Smart Pilot melted 2A fuse, blown board
04-29-19, 09:18 PM (This post was last modified: 04-30-19 09:07 AM by Chuck - Raymarine - Moderator.)
Post: #3
rickgard Offline
Junior Member
**
 		Posts: 7
Joined: May 2016
Reputation: 0
RE: [CA11] Smart Pilot melted 2A fuse, blown board
thanks very much, Chuck.
I will remove and inspect the autopilot control head too.

I am replacing the entire course computer; the surge must've been spectacular since it burned most of the computer. And this is what concerns me now - Is it possible for this to happen again? as I originally posted I am finding voltages no higher than 11.7V coming to the old course computer. Are there specifications available for what I should find in the SeaTalk network? How can I tell if there is some path shorted?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Smart Pilot melted 2A fuse, blown board - rickgard - 04-29-19 09:18 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication