Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Smart Pilot melted 2A fuse, blown board

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Smart Pilot melted 2A fuse, blown board
05-09-19, 08:23 AM
Post: #12
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Smart Pilot melted 2A fuse, blown board
rickgard,

Indeed, the part which you have described is the autopilot course computer's rate gyro. It is the rate gyro which turns the S1, S2, and S3 autopilot course computers into S1G, S2G, and S3G autpilot course computers. Assuming that the rate gyro is operational (the only way to know is to try it with the new course computer), then the rate gyro may simply be removed from the old course computer and installed on the new course computer.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Smart Pilot melted 2A fuse, blown board - Chuck - Raymarine - Moderator - 05-09-19 08:23 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication