Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] X-5 Autopilot i60 Wind Instrument
05-06-19, 10:17 AM
Post: #6
RE: [CA11] X-5 Autopilot i60 Wind Instrument

The ST6002 appears to be communicating correctly with the X5 autopilot course computer. However, should 1) the A06073 / 39.4in (1.0m) SeaTalkng to SeaTalk Adapter Cable (when interfaced directly to the ST6002) when used alone not have permitted the ST6002 from communicating with the i60 Wind instrument; and 2) should the i60 Wind instrument when interfaced via SeaTalkng alone to the X5 autopilot course computer (v3.05) not have permitted the autopilot to enter wind vane mode, then it would appear that the i60 Wind instrument may have a fault within its communications circuitry. Accordingly, it would be recommended that the i60 Wind instrument display Raymarine’s Product Repair Center to be bench checked / serviced. Should it be easily accomplished, then you may want to consider sending the ST6002 along with the X5 to permit these devices to be tested as a system.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
RE: [CA11] X-5 Autopilot i60 Wind Instrument - Chuck - Raymarine - Moderator - 05-06-19 10:17 AM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)