[TG11] setup 37stv to point to 72.7 sat for dish

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[TG] [TG11] setup 37stv to point to 72.7 sat for dish

05-02-19, 06:34 PM (This post was last modified: 05-21-19 07:38 AM by Chuck - Raymarine - Moderator.)

Post: #1

unixdood Offline

Member

Posts: 87
Joined: Mar 2016
Reputation: 0

[TG11] setup 37stv to point to 72.7 sat for dish

I have a 37 stv and I am trying to point to 72.7 on the front of the acu. Can this be done in a user definable slot? If so, what are the settings please? If I need to use the GUI to do this, will the serial cable that came with the MIM work if I plug it into my laptop or do I need a different cable?
Thanks

« Next Oldest | Next Newest »

Messages In This Thread

[TG11] setup 37stv to point to 72.7 sat for dish - unixdood - 05-02-19 06:34 PM

RE: [TG11] setup 37stv to point to 72.7 sat for dish - Tom - Raymarine - Moderator - 05-21-19, 01:15 AM

RE: [TG11] setup 37stv to point to 72.7 sat for dish - unixdood - 05-21-19, 05:51 AM

RE: [TG11] setup 37stv to point to 72.7 sat for dish - Tom - Raymarine - Moderator - 05-27-19, 10:16 PM

RE: [TG11] setup 37stv to point to 72.7 sat for dish - unixdood - 05-28-19, 05:24 AM

RE: [TG11] setup 37stv to point to 72.7 sat for dish - Tom - Raymarine - Moderator - 05-29-19, 01:08 AM

User(s) browsing this thread: 1 Guest(s)