Display Generator Data

Thread Rating:

1 Vote(s) - 3 Average
1
2
3
4
5

Threaded Mode | Linear Mode

Display Generator Data

05-16-16, 03:50 PM (This post was last modified: 05-17-16 10:32 AM by Chuck - Raymarine - Moderator.)

Post: #3

jeokeefe@gmail.com Offline

Junior Member

Posts: 39
Joined: Mar 2016
Reputation: 0

RE: Display Generator Data

I have used N2KViewer to confirm everything you have said. Engine 3 / Id 2 is broadcasting data. However the generator does not broadcast RPM + Fuel Flow Rate. When trying to detect the 3rd engine, Raymarine wont detect it. I suspect it is because there is no RPM data? Either way, the third party display on the network allows you to manually select the engine and properly shows the data.

How can I get Raymarine to detect the engine with no RPM data?

« Next Oldest | Next Newest »

Messages In This Thread

Display Generator Data - jeokeefe@gmail.com - 05-14-16, 03:19 PM

RE: Display Generator Data - Chuck - Raymarine - Moderator - 05-16-16, 03:06 PM

RE: Display Generator Data - jeokeefe@gmail.com - 05-16-16 03:50 PM

RE: Display Generator Data - Chuck - Raymarine - Moderator - 05-17-16, 10:31 AM

RE: Display Generator Data - jeokeefe@gmail.com - 05-19-16, 07:44 PM

RE: Display Generator Data - Chuck - Raymarine - Moderator - 05-20-16, 10:46 AM

User(s) browsing this thread: 1 Guest(s)