Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axiom Pro Track problem

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom Pro Track problem
05-10-19, 04:23 PM (This post was last modified: 05-13-19 01:22 PM by Chuck - Raymarine - Moderator.)
Post: #1
b4a Offline
Junior Member
**
 		Posts: 7
Joined: Mar 2019
Reputation: 0
[CA11] Axiom Pro Track problem
Hello,

I am circumnavigating with my boat and so far sailed 5,272 nm.

I exported my tracks to an SD card and to my surprise it seems that the tracks of the last few weeks are not included in the exported GPX file. I can see my tracks on the chart plotter, but they are not in the GPX file.

Please advise.
Find all posts by this user
Quote this message in a reply
05-13-19, 01:30 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Axiom Pro Track problem
Welcome to the Raymarine Forum b4a,

Which version of LightHouse 3 software is presently installed with the MFD's memory? How many tracks are currently stored within the MFD's memory? Was the currently active track saved prior to exporting?
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication