Raymarine forum / Raymarine Forums / Multifunction Displays v / [DG] [DG11] eS128 and Axion Pro

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] eS128 and Axion Pro
05-16-19, 10:34 AM (This post was last modified: 05-21-19 10:32 AM by Chuck - Raymarine - Moderator.)
Post: #1
LUAR Offline
Junior Member
**
 		Posts: 4
Joined: Apr 2019
Reputation: 0
[DG11] eS128 and Axion Pro
I have two eS128 and one es98.
Can I replace an eS128 (master) with an AXION Pro also with master function?
Will the other two (eS128 and eS98) work?
When there are updates is it possible to do through the master for the eS?
Find all posts by this user
Quote this message in a reply
05-22-19, 10:53 AM
Post: #2
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: [DG11] eS128 and Axion Pro
Hi Luar,

The AXIOM PRO uses Lighthouse 3 operating platform, the eS Series displays can be upgraded from Lighthouse 2 to Lighthouse 3 operating system, once this upgrade is done, you can connect the AXIOM PRO to the two remaining eS Series displays.

The AXIOM PRO can be used to update the eS Series displays.

Regards

Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication