Raymarine forum / Raymarine Forums / Marine Weather / Satellite Radio v / [CA] [CA11] Sirius I’d #

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Sirius I’d #
05-21-19, 08:49 PM (This post was last modified: 05-24-19 09:50 AM by Chuck - Raymarine - Moderator.)
Post: #1
Jamb2221 Offline
Junior Member
**
 		Posts: 1
Joined: Jul 2017
Reputation: 0
[CA11] Sirius I’d #
I have the E120 classic display. I have the sr100 Sirius receiver. I have Sirius marine weather. Had no problem since installed (2010). For some reason this year I have lost the Sirius ID # on the MFD. How do I get it back on?
Find all posts by this user
Quote this message in a reply
05-24-19, 09:57 AM (This post was last modified: 05-24-19 09:58 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Sirius I’d #
Welcome to the Raymarine Forum Jamb2221,

The reported symptom is indicative of no communications between the MFD and the SR100. Troubleshooting should begin with verification that the circuit supplying the SR100 has been switched ON and if so, then to examine the SR100's Status LED and and report its color and flash code (see below).

[Image: attachment.php?aid=3062]

Please additionally respond with information concerning the signal level sensed by the SR100 (see below).

[Image: attachment.php?aid=3063]


Attached File(s) Thumbnail(s)
       
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication