European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
|
e7 and EV200
|
|
05-22-16, 12:17 PM
(This post was last modified: 05-23-16 10:49 AM by Chuck - Raymarine - Moderator.)
Post: #5
|
|||
|
|||
|
RE: e7 and EV200
Chuck,
I installed the 12 volt cable and turned off the power switch on the EV200. The e7 still does not see the AP. Each works perfectly separately. each is connected using NG backbone and spur cables and one TEE and there is a terminator on the TEE. The P70 has a short spur to the TEE, then a backbone to a 5 way next to the ACU. ACU and compass are connected to the 5 way. The 5 way then has a backbone to another 5 way where the e7 spur and 12 volt are plugged in. there is a terminator in the end of the 5 way. Plotter is running 16.47. Suggestions? |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
e7 and EV200 - jsaronson - 05-17-16, 02:16 PM
RE: e7 and EV200 - Chuck - Raymarine - Moderator - 05-17-16, 02:36 PM
RE: e7 and EV200 - jsaronson - 05-17-16, 02:45 PM
RE: e7 and EV200 - Chuck - Raymarine - Moderator - 05-17-16, 04:01 PM
RE: e7 and EV200 - jsaronson - 05-22-16 12:17 PM
RE: e7 and EV200 - Chuck - Raymarine - Moderator - 05-23-16, 11:09 AM
|
User(s) browsing this thread: 2 Guest(s)