[TG11] Raypilot with Garmin MFD

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[TG] [TG11] Raypilot with Garmin MFD

06-04-19, 08:29 PM (This post was last modified: 06-05-19 11:49 AM by Chuck - Raymarine - Moderator.)

Post: #2

Tom - Raymarine - Moderator Offline

Administrator

Posts: 1,067
Joined: Nov 2017
Reputation: 7

RE: [TG11] Raypilot with Garmin MFD

Hello rlfletc,

You'll need a Seatalk1 - SeatalkNG (AKA NMEA2000) convertor (http://www.raymarine.com.au/view/?id=3011. That will bridge heading from the pilot's Seatalk1 network to NMEA2000 and navigation data from the Garmin back the other way. You'll also need an STNG-Devicenet adaptor cable.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.

« Next Oldest | Next Newest »

Messages In This Thread

[TG11] Raypilot with Garmin MFD - rlfletc - 06-03-19, 12:54 PM

RE: [TG11] Raypilot with Garmin MFD - Tom - Raymarine - Moderator - 06-04-19 08:29 PM

User(s) browsing this thread: 1 Guest(s)