Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Copy and down load waypoints
06-11-19, 06:33 AM (This post was last modified: 06-11-19 04:05 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Copy and down load waypoints
I have been searching the forum and have been unable to find what I need .. I am sure it is a relatively simple thing , so I apologize. I want to down load the waypoints on my e127 and up load them to my eS78.. The units are not interfaced, and for now I want to keep them that way .... for now !! Thanks in advance . Tony T
Find all posts by this user
Quote this message in a reply
06-12-19, 10:55 AM
Post: #2
RE: [CA11] Copy and down load waypoints
Welcome back to the Raymarine Forum Tony,

Detailed instructions for exporting your data may be found within the Saving Waypoints, Routes and Track section of Chapter 4.1 Saving user data and user
settings of the LightHouse II Release 19 Operating Instructions. Similarly, detailed instructions for importing your data may be found within the Importing Waypoints, Routes, or
Tracks section of Chapter 4.1 Saving user data and user
settings.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)