Vessel View Interfacing
|
05-19-16, 07:57 AM
Post: #6
|
|||
|
|||
RE: Vessel View Interfacing
Noted. As was implied within my prior response, the Raymarine MFDs are simply repeaters of NMEA 2000 tank level data from your VesselView system. From the standpoint of configuring the MFDs, the only configuration setting which need be configured is specification of the number of fuel tanks. Should the VesselView system transmit the correct instance numbers (0 (port), 1 (center), and 2 (starboard) and correct fluid type, then the MFDs will in turn repeat this data within its Fuel Tank 1, Tank 2, and Tank 3 Data application data items.
|
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Vessel View Interfacing - Firewater - 05-18-16, 11:33 AM
RE: Vessel View Interfacing - Chuck - Raymarine - Moderator - 05-18-16, 12:53 PM
RE: Vessel View Interfacing - Firewater - 05-18-16, 01:36 PM
RE: Vessel View Interfacing - Firewater - 05-18-16, 08:19 PM
RE: Vessel View Interfacing - Chuck - Raymarine - Moderator - 05-18-16, 01:57 PM
RE: Vessel View Interfacing - Chuck - Raymarine - Moderator - 05-19-16 07:57 AM
RE: Vessel View Interfacing - Firewater - 06-17-16, 12:45 PM
RE: Vessel View Interfacing - Chuck - Raymarine - Moderator - 06-17-16, 01:22 PM
|
User(s) browsing this thread: 4 Guest(s)