Raymarine forum / Raymarine Forums / Autopilots v / [DG] [Dg11] Autopilot control from Es98 with Autohelm type 300 course computer

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [Dg11] Autopilot control from Es98 with Autohelm type 300 course computer
06-15-19, 09:21 AM (This post was last modified: 06-17-19 09:01 AM by Derek - Raymarine - Moderator.)
Post: #1
Rpalladino Offline
Junior Member
**
 		Posts: 4
Joined: Dec 2018
Reputation: 0
[Dg11] Autopilot control from Es98 with Autohelm type 300 course computer
I currently have 2 Es98 MFD’s running the latest version of light house 3, connected to a seatalk ng backbone. Also connected via seatalk to seatalk ng is a Autohelm type 300 course computer. Is autopilot control achievable from the Es98 using lighthouse 3?
Find all posts by this user
Quote this message in a reply
06-17-19, 09:03 AM
Post: #2
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: [Dg11] Autopilot control from Es98 with Autohelm type 300 course computer
Hi Rpalladino

Thank you for your enquiry

Direct Autopilot control from MFDs running LH3 software is only possible with EVolution autopilots, there is no direct control of any legacy autopilots from MFDs running LH3.

Regards

Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication