[LW] [LW11] Mfd/nematode 0183

[Nandi]

Hi,

1. The GPS source is the es128 mfd internal gps; satellite status seems fine.
2. There is one other gps source integrated into the system, an older Philips AP Navigator gps which works fine but is switched off when using the MFD.
3. There is no further Gps connected,B&G or otherwise.
4. The older gps is the Philips navigator mentioned in ‘2’ above.
5. The es128 is running Lighthouse 1, v19.03-00036
6. The pilot is a B&G Network Pilot, same vintage as the Network instruments.
7. Yes, the pilot head shows’ No Nmea input’; the instruments ( wind ,speed,depth etc.) all show ‘pilot error’.
8. The Network instruments sound alarm when this occurs.
9. Yes this is when the fault occurs, when tracking a route.
10. No, there is no problem when not tracking, I.e. following compass course or wind mode, but no nmea input required for this.

Hope this helps