Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Error Message
06-24-19, 03:40 PM
Post: #2
RE: [CA11] Error Message
Welcome to the Raymarine Forum Sadey,

Please click here to view a FAQ addressing this subject. As this problem may indicate that one of the Raymarine products features older software, it is recommended that all Raymarine products be updated with the latest available Raymarine product software updates. Should the problem persist, then the blocking device may be determined by unplugging devices one by one from the backbone (recommend unplugging third party products first) and then testing the MFD's Data Sources feature. Should the blocking device be determined to be a Raymarine product and it be operating with the latest available software update, then it would be recommended that the Raymarine product be sent to Raymarine’s Product Repair Center to be bench checked / serviced.

As indicated within the referenced FAQ, after temporarily disconnecting the blocking device from the system and performing the Data Sources selection, then the blocking device may be plugged back into the system.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
[CA11] Error Message - Sadey - 06-24-19, 09:37 AM
RE: [CA11] Error Message - Chuck - Raymarine - Moderator - 06-24-19 03:40 PM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)