[CA] [CA11] S2G and ST7001 no autolearn
|
07-22-19, 01:06 PM
Post: #2
|
|||
|
|||
RE: [CA11] S2G and ST7001 no autolearn
Welcome to the Raymarine Forum PHINNROS,
Failure of a S2G autopilot course computer to support Auto Learn may occur if the autopilot's Calibration Lock feature has been configured ON or if the autopilots gyro has failed and/or been unplugged from the processor board. Unfortunately, parts and service are no longer available for S1G/S2G/S3G Smart Pilots. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] S2G and ST7001 no autolearn - PHINNROS - 07-16-19, 02:37 PM
RE: [CA11] S2G and ST7001 no autolearn - Chuck - Raymarine - Moderator - 07-22-19 01:06 PM
RE: [CA11] S2G and ST7001 no autolearn - PHINNROS - 07-23-19, 10:46 AM
RE: [CA11] S2G and ST7001 no autolearn - Chuck - Raymarine - Moderator - 07-23-19, 10:52 AM
RE: [CA11] S2G and ST7001 no autolearn - PHINNROS - 07-23-19, 01:40 PM
RE: [CA11] S2G and ST7001 no autolearn - Chuck - Raymarine - Moderator - 07-23-19, 01:43 PM
RE: [CA11] S2G and ST7001 no autolearn - PHINNROS - 07-26-19, 04:22 PM
RE: [CA11] S2G and ST7001 no autolearn - Chuck - Raymarine - Moderator - 07-29-19, 08:18 AM
|
User(s) browsing this thread: 2 Guest(s)