[CA] [CA11] S2G and ST7001 no autolearn
|
07-23-19, 10:52 AM
Post: #4
|
|||
|
|||
RE: [CA11] S2G and ST7001 no autolearn
PHINNROS,
If the S2G gyro's cable was unplugged from the board, then it would be possible to interface the S2G to an operational Pathfinder Smart Heading System (also known as the Gyro Plus ... neither of which have been produced in over ten years) to permit the S2G once again perform as a SmartPilot. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] S2G and ST7001 no autolearn - PHINNROS - 07-16-19, 02:37 PM
RE: [CA11] S2G and ST7001 no autolearn - Chuck - Raymarine - Moderator - 07-22-19, 01:06 PM
RE: [CA11] S2G and ST7001 no autolearn - PHINNROS - 07-23-19, 10:46 AM
RE: [CA11] S2G and ST7001 no autolearn - Chuck - Raymarine - Moderator - 07-23-19 10:52 AM
RE: [CA11] S2G and ST7001 no autolearn - PHINNROS - 07-23-19, 01:40 PM
RE: [CA11] S2G and ST7001 no autolearn - Chuck - Raymarine - Moderator - 07-23-19, 01:43 PM
RE: [CA11] S2G and ST7001 no autolearn - PHINNROS - 07-26-19, 04:22 PM
RE: [CA11] S2G and ST7001 no autolearn - Chuck - Raymarine - Moderator - 07-29-19, 08:18 AM
|
User(s) browsing this thread: 2 Guest(s)