[CA] [CA11] S2G and ST7001 no autolearn
|
07-26-19, 04:22 PM
(This post was last modified: 07-29-19 08:12 AM by Chuck - Raymarine - Moderator.)
Post: #7
|
|||
|
|||
RE: [CA11] S2G and ST7001 no autolearn
So what I have discovered is that there is no gyro on the unit. The Seller on Ebay is looking into a replacement gyro for me. It is my understanding that there were 2 different Gyros on these boards. The question: Is there a way to determine what one was removed? Serial # or other details that would make it possible to identify.
So I looked very carefully and was able to determine that the resistors R145 and R147 are 10K, there for it looks that the Gyro was a Murata. Can you please confirm Attached is a photo of the board. I can take a better one or of more detail if necessary. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] S2G and ST7001 no autolearn - PHINNROS - 07-16-19, 02:37 PM
RE: [CA11] S2G and ST7001 no autolearn - Chuck - Raymarine - Moderator - 07-22-19, 01:06 PM
RE: [CA11] S2G and ST7001 no autolearn - PHINNROS - 07-23-19, 10:46 AM
RE: [CA11] S2G and ST7001 no autolearn - Chuck - Raymarine - Moderator - 07-23-19, 10:52 AM
RE: [CA11] S2G and ST7001 no autolearn - PHINNROS - 07-23-19, 01:40 PM
RE: [CA11] S2G and ST7001 no autolearn - Chuck - Raymarine - Moderator - 07-23-19, 01:43 PM
RE: [CA11] S2G and ST7001 no autolearn - PHINNROS - 07-26-19 04:22 PM
RE: [CA11] S2G and ST7001 no autolearn - Chuck - Raymarine - Moderator - 07-29-19, 08:18 AM
|
User(s) browsing this thread: 2 Guest(s)