[CA11] SR150 Not displaying wind & wave graphics

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] SR150 Not displaying wind & wave graphics

07-23-19, 04:28 PM (This post was last modified: 07-24-19 07:49 AM by Chuck - Raymarine - Moderator.)

Post: #5

John Pecora Offline

Junior Member

Posts: 10
Joined: Feb 2016
Reputation: 0

RE: [CA11] SR150 Not displaying wind & wave graphics

Chuck,
The reading is almost always high, at times--infrequent--it will shift to medium for a few seconds but never below that except for initial MFD startup.
Thanks, John

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] SR150 Not displaying wind & wave graphics - John Pecora - 07-16-19, 08:02 PM

RE: [CA11] SR150 Not displaying wind & wave graphics - Chuck - Raymarine - Moderator - 07-22-19, 01:22 PM

RE: [CA11] SR150 Not displaying wind & wave graphics - John Pecora - 07-23-19, 07:06 AM

RE: [CA11] SR150 Not displaying wind & wave graphics - Chuck - Raymarine - Moderator - 07-23-19, 02:23 PM

RE: [CA11] SR150 Not displaying wind & wave graphics - John Pecora - 07-23-19 04:28 PM

RE: [CA11] SR150 Not displaying wind & wave graphics - Chuck - Raymarine - Moderator - 07-25-19, 12:33 PM

RE: [CA11] SR150 Not displaying wind & wave graphics - John Pecora - 07-25-19, 04:26 PM

RE: [CA11] SR150 Not displaying wind & wave graphics - Chuck - Raymarine - Moderator - 07-26-19, 07:53 AM

User(s) browsing this thread: 1 Guest(s)