Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Axiom Update
07-22-19, 10:26 PM (This post was last modified: 07-29-19 12:19 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Axiom Update
I've been trying to update my Axiom and at the end of the longest archive extraction I've ever witnessed I get this error msg
"Unable to finish expanding “Axiom_v3.9_GPL_Sources.tar.bz2” into “NO NAME”.
Could not move “.BAH.M3srR” into"

I've downloaded and tried to expand the archive twice with both times yielding the same results.

The mSD I'm using is formatted to FAT32 and is 32GB capacity.

Find all posts by this user
Quote this message in a reply
07-29-19, 12:21 PM
Post: #2
RE: [CA11] Axiom Update
Welcome to the Raymarine Forum iRondo,

Was the reported message displayed by the MFD during the software update or when extracting the contents of the compressed folder to the microSD memory card. Were you attempting to update the software of the MFD in which the microSD memory card had been inserted or one of the other networked MFDs within the system?
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 

Forum Jump:

User(s) browsing this thread: 1 Guest(s)