The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Networking / System Integration v / C80 mfd adding sr50/dsm250/260vhf

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
C80 mfd adding sr50/dsm250/260vhf
05-23-16, 09:45 PM (This post was last modified: 05-24-16 09:39 AM by Chuck - Raymarine - Moderator.)
Post: #1
skidrow69 Offline
Junior Member
**
 		Posts: 11
Joined: May 2016
Reputation: 0
C80 mfd adding sr50/dsm250/260vhf
Hello,
I currently have a c80 mfd with 240vhf attached to a raymarine radar dome. I would like to update the system with the addition of a sr50 as well as a dsm250 fishfinder and a new 260vhf radio with AIS.

Currently the gps is hooked to the c80 using Seatalk 2 cable. I see that the sr50 uses seatalk ng...

I know the fishfinder dsm250 has a dedicated connection on the c80..so that only leaves the 260vhf and the sr50 satellite radio to connect to the c80.

The sr50 shows the connection to the c80 using a seatalk connection as well.
Can you tell me what I require as far as cables/converters to connect all of these to my c80. I would also like to know that if I connect the 260vhf to the c80 using NMEA 0183, will I be able to see the dsc calls on the mfd as well as any AIS vessels??
Thanks
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
C80 mfd adding sr50/dsm250/260vhf - skidrow69 - 05-23-16 09:45 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication