Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Multi function Display
08-01-19, 07:22 PM (This post was last modified: 08-05-19 02:16 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Multi function Display
I have an E127 and EV-1 with a P70 Auto pilot. My question is : When I have the Autopilot engaged I get a "header" along the bottom of the E127 with status of the Autopilot. It has a "Standby" button on the left, It tells me the route I have loaded and distance to waypoint etc. I can read most of the info, but how can I increase the font of the "header" running at the bottom of my screen. I struggle to read the small font. I have all of my manuals, but either, I don't speak RAYMARINE, or the topic is not being worded properly by me when I try to look it up. Any help would be appreciated.
Find all posts by this user
Quote this message in a reply
08-05-19, 02:19 PM
Post: #2
RE: [CA11] Multi function Display
Welcome to the Raymarine Forum Bill,

Unfortunately, the font size utilized within the Pilot Controls feature is not user configurable.
Find all posts by this user
Quote this message in a reply
Post Reply 

Forum Jump:

User(s) browsing this thread: 1 Guest(s)