[CA] [CA11] Axiom suddenly not recognizing SR150

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Robinsonh2o,

Unfortunately, the currently supported diagnostics within LH3 software (v3.10.39 at the time of this response) do not include diagnostics for a SR150 or SR200. Should the MFD detect the presence of the SR150, then the Chart application's main menu will list Weather among options for Simple, Detailed, etc. located near the bottom of this menu. If not, then this option will not be displayed. Should the Chart application's menu not list Weather as stated above, then the SR150's status LED should be examined to ensure that its Power (amber), Network (flashing green), and antenna (solid green) LED are illuminated as specified within this sentence. I powered and illuminated as specified, then it would be recommended that a Power On Factory Reset operation be performed to correct the reported symptom. If powered and not illuminated as specified, then the SR150 should be sent to Raymarine’s Product Repair Center to be bench checked / serviced or that it be replaced with a SR200. Should the MFD be detecting other devices which have been interfaced to the system via a network switch, then it would be recommended that the communications cable corresponding to one of these devices be unplugged from the Network Switch and that the SR150's communications cable instead be plugged into the vacated socket. Should doing so not then permit the Weather option to appear within the Chart application's menu, then it would be recommended that the SR150 be sent to Raymarine’s Product Repair Center to be bench checked / serviced or that it be replaced with a SR200.