The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[JH] [JH11] Micro-talk failure
08-10-19, 01:59 AM (This post was last modified: 08-29-19 02:07 PM by John - Raymarine - Moderator.)
Post: #1
[JH11] Micro-talk failure
I have a Premium i70S sailing starter kit, it’s run pretty much OK for the last 1000 miles. This is all linked to an Axiom 9 and HD radar, I’ve been happy with the system so far.
However yesterday it appeared that the T120 game wasn’t sending a signal.The wind was almost dead calm and we’re at the dock in Alaska at this time.
Today we had some breeze ski thought to check it out. I started everything as normal but had no wind data on the i70S.
I went into the Axiom and checked data sources for the inputs, everything shows up except the wind data which normally showed the Microtalk E70361.
I re started everything and watched the Microtalk lights on start up. It stayed a long time Red for starting up then eventually solid green but it does not go any further. The Micronet does not appear to start up. The wind unit and wireless remote have had hours and hours of sun this summer, so I don’t think it’s power.
Is there anyway to check the Auto networking is still valid?
Is there any kind of reset in the T113.
As I’m single handing I really need the wind function to steer to an AWG for extended time.
Any suggestions would be helpful .
Thanks
Michael
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[JH11] Micro-talk failure - SVBREILA - 08-10-19 01:59 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)