Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Multiple Auto Pilot Display Heads

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Multiple Auto Pilot Display Heads
08-16-19, 09:15 AM (This post was last modified: 08-22-19 12:55 PM by Chuck - Raymarine - Moderator.)
Post: #1
searat11 Offline
Junior Member
**
 		Posts: 15
Joined: Nov 2017
Reputation: 0
[CA11] Multiple Auto Pilot Display Heads
Hi,
Is it possible to have multiple Auto Pilot Display Heads (P70s) on the STNG network. I am thinking about have one behind each wheel.
thanks,
Ian
Find all posts by this user
Quote this message in a reply
08-22-19, 01:17 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Multiple Auto Pilot Display Heads
Welcome to the Raymarine Forum Ian,

It is indeed possible to have more than one autopilot control head within a system. In fact, it would be considered to be a best installation practice to have an autopilot control head located at each steering station onboard the vessel. One need simply install the additional autopilot control head(s) as individual spurs to the system's powered and properly terminated SeaTalkng / NMEA 2000 backbone.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication