[TG11] Axiom units chane from ft/miles to m/km

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[TG] [TG11] Axiom units chane from ft/miles to m/km

08-26-19, 05:09 PM (This post was last modified: 09-09-19 01:26 PM by Chuck - Raymarine - Moderator.)

Post: #3

E.hatch2086@cox.net Offline

Member

Posts: 75
Joined: Jun 2016
Reputation: 0

RE: [TG11] Axiom units chane from ft/miles to m/km

Hi yes I have the E22158 converter itâ€™s connected between my ES7 and Axiom 12. I also have vintage 2004 Raymarine tridata displays speed,depth and a vintage 2004 C120 classic MFD as well as Raymarine autohelm vintage 2004. And a vintage 2016 wind indicator . All the data shows up on all three MFDâ€™s. I also have Ais receiver data going to the ES7 on a icom receiver Nema 183 and Ais data going to the Axiom 12 via a Simrad VHF radio with Ais over Nema 2000 . If I disconnect the the E22158 from the Axiom 12 I suspect I will loose all my instrument data (speed,depth,wind) on the Axiom.

« Next Oldest | Next Newest »

Messages In This Thread

[TG11] Axiom units chane from ft/miles to m/km - E.hatch2086@cox.net - 08-19-19, 04:48 PM

RE: [TG11] Axiom units chane from ft/miles to m/km - Tom - Raymarine - Moderator - 08-26-19, 01:10 AM

RE: [TG11] Axiom units chane from ft/miles to m/km - E.hatch2086@cox.net - 08-26-19 05:09 PM

RE: [TG11] Axiom units chane from ft/miles to m/km - jorbro - 09-01-19, 05:00 AM

RE: [TG11] Axiom units chane from ft/miles to m/km - karlista - 08-26-19, 11:00 PM

RE: [TG11] Axiom units chane from ft/miles to m/km - Tom - Raymarine - Moderator - 08-27-19, 01:57 AM

RE: [TG11] Axiom units chane from ft/miles to m/km - Tom - Raymarine - Moderator - 08-27-19, 02:01 AM

RE: [TG11] Axiom units chane from ft/miles to m/km - Tom - Raymarine - Moderator - 09-10-19, 10:52 PM

User(s) browsing this thread: 2 Guest(s)