Spontaneous restarting e7 won't initialize

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum folkmeister,

It is recommended that all memory cards be removed from the MFD's memory card reader and that the MFD then be restarted. Should the problem persist, then it is recommended that the MFD's trim bezel be examined to ensure that it is properly installed (oriented such that the recess for the chart door is located on the lower right hand side) and is not holding any of the MFD's buttons in the pressed. If not, then it is recommended that the latest software be forced again into the MFD's memory:
1) the circuit supplying power to the MFD be switched OFF
2) the latest a/c/e/eS/gS-Series MFD software be downloaded again from Raymarine's website, its files extracted and saved into the root level directory of a microSD memory card
3) the microSD memory card containing the software update files be inserted into the MFD's memory card reader
4) the circuit supplying power to the MFD be switched ON

Should the forced update fail or the MFD continue to exhibit the reported symptoms, then MFD should be tested again with its trim ring removed. Should the problem persist thereafter, then the MFD should be sent to Raymarine’s Product Repair Center to be bench tested/serviced.