Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[JH11] Upgrading from E80...
09-04-19, 03:28 PM (This post was last modified: 09-10-19 09:21 AM by John - Raymarine - Moderator.)
Post: #1
[JH11] Upgrading from E80...
I am looking to upgrade from my 2007 E80 Classic. It has a DSM 300 and a through hull transducer.

I do not need a ton of bells and whistles - just primarily looking for GPS and depth with fishfinder being nice to have. I have an Everglades 243 and only run/play/fish inshore both salt and fresh.

I have looked at the Axiom 9 and it seems great but wondering if it is too much for me.

Could you please provide me with guidance on a display and any other equipment I would need (i.e. transducer).

Thank you very much.

Find all posts by this user
Quote this message in a reply
09-10-19, 09:32 AM
Post: #2
RE: [JH11] Upgrading from E80...

The Axiom 9 RV unit would be the best unit for you to get to be able to use you current transducer on board.

You would need the following adapter cable to connect your transducer that is plugged into you DSM 300 directly into the transducer port on the Axiom 9.

A80489 7 Pin to Axiom RV transducer adapter cable.

Best Regards
Find all posts by this user
Quote this message in a reply
Post Reply 

Forum Jump:

User(s) browsing this thread: 1 Guest(s)