Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Auto pilot
09-09-19, 03:52 PM (This post was last modified: 09-09-19 03:52 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] Auto pilot
Welcome to the Raymarine Forum Bigbeam,

Should the vessel have a single 12.1 cu. in. steering ram and should the vessel feature a 12VDC power distribution system, then the T70330 EV-150 Hydraulic autopilot system would be recommended for this application. An additional spur socket will need to be added to the powered and properly terminated SeaTalkng / NMEA 2000 backbone which will interface the autopilot components to one another. The eS78 MFD will then be interfaced via an appropriate length of SeaTalkng Spur Cable to the this same backbone by connecting it to the added spur socket.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
[CA11] Auto pilot - Bigbeam - 09-09-19, 11:54 AM
RE: [CA11] Auto pilot - Chuck - Raymarine - Moderator - 09-09-19 03:52 PM
RE: [CA11] Auto pilot - Bigbeam - 09-10-19, 12:37 PM
RE: [CA11] Auto pilot - Bigbeam - 09-11-19, 09:17 AM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)