Threaded Mode | Linear Mode

mikeyor

Hi Derek,
Conditions were ideal today to do the seatrial calibration. I carried it out and the deviation screen showed 6 degrees. I carried out the steering compass aligment and saved the results. I then did four hour trip under power mostly using a stored route. The autopilot displayed a heading that matched the steering compass and it now seems that everything is back to normal.

Do you have any thoughts on what might have caused the autopilot compass display to be turned off? Could it have been a voltage spike?

Thank you again for your help. I have always found the forum to be a super source of excellent advice.

Michael Yorke