Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] no alarm audio on axiom xl
09-25-19, 01:59 PM (This post was last modified: 09-25-19 02:13 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] no alarm audio on axiom xl
I updated my axiom xl master and axiom pro to the newest version of LH that was available last May. The axiom XL no longer sounds with an alarm. The axiom pro still does. Any ideas?
Find all posts by this user
Quote this message in a reply
09-25-19, 02:19 PM
Post: #2
RE: [CA11] no alarm audio on axiom xl
Welcome to the Raymarine Forum shparrot,

Please note that there have been two major LightHouse 3 software updates since the time that the software within your MFDs was last updated. At the time of this response, the latest available LightHouse 3 software for Axiom/Axiom Pro/Axiom XL MFDs was v3.10.42. It accordingly recommended that the software within your system's MFDs be updated and that the system then be tested for the previously specified symptom. Should the problem persist, then it would be recommended that a Power On Factory Reset be performed on each of the systems MFDs. Should the problem persist thereafter, then it would be recommended that the Axiom XL MFD be sent to Raymarine’s Product Repair Center to be bench checked / serviced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)