[CA11] Upgrading my A70D

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Upgrading my A70D

03-29-20, 09:58 AM

Post: #3

brentjohnston Offline

Junior Member

Posts: 4
Joined: Aug 2019
Reputation: 0

RE: [CA11] Upgrading my A70D

I purchased an Axiom 9 and am finally getting around to installing it. There are 4 wires that are wired directly into the power cord on the A70:
Yellow(NMEA Tx1+VE), Brown(-VE), Orange/Yellow(NMEA TX2+VE), Orange/Brown(-VE)
These 4 wires originate at the ST6 002 controller and Iâ€™m not sure how to install them in the new system.
Thank you for your help so far and I hope to hear from you soon.
Brent Johnston

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Upgrading my A70D - brentjohnston - 09-27-19, 04:32 PM

RE: [CA11] Upgrading my A70D - Chuck - Raymarine - Moderator - 10-01-19, 03:12 PM

RE: [CA11] Upgrading my A70D - brentjohnston - 03-29-20 09:58 AM

RE: [CA11] Upgrading my A70D - Chuck - Raymarine - Moderator - 03-30-20, 09:01 AM

RE: [CA11] Upgrading my A70D - brentjohnston - 03-31-20, 02:22 PM

RE: [CA11] Upgrading my A70D - Chuck - Raymarine - Moderator - 03-31-20, 03:15 PM

RE: [CA11] Upgrading my A70D - brentjohnston - 04-01-20, 10:52 AM

RE: [CA11] Upgrading my A70D - Chuck - Raymarine - Moderator - 04-01-20, 12:12 PM

User(s) browsing this thread: 1 Guest(s)