Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
GS125 Footprint to Axiom
10-01-19, 03:10 PM
Post: #1
Wink GS125 Footprint to Axiom
Are any of the new Axiom units able to “fit” into the spot of a GS125? I have 2 gs125’s installed and would like to move up to at least one axiom without having to re-make my entire dash. Does raymarine make any adapter plates if none of the new axiom’s are a close fit?
Find all posts by this user
Quote this message in a reply
10-02-19, 02:29 PM (This post was last modified: 10-02-19 02:30 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] GS125 Footprint to Axiom
Welcome to the Raymarine Forum John,

Axiom XL 16 MFDs are the recommended replacements for gS125 MFDs. The footprint of the Axiom XL 16 MFD are approximately the same in the vertical dimension and slightly wider than the gS125 MFDs. The exact dimensions of the Axiom XL 16 MFDs may be found within the Axiom XL 16 MFD's installation template. The Axiom XL 16 MFDs will utilize the same Power/NMEA0183/Video Cable and Ethernet (RayNet Cables). SeaTalkng Spur Cables maybe adapted to be mated to the Axiom XL MFD.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 

Forum Jump:

User(s) browsing this thread: 1 Guest(s)