[CA] [CA11] AIS 700 - Errors on power
|
10-01-19, 04:45 PM
(This post was last modified: 10-02-19 02:46 PM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[CA11] AIS 700 - Errors on power
Hi Team,
After i recieved my new replacement 700, plugged it in and everything seemed to work fine on the chartplotter and i can see my AIS signals going out - so great. The i plug in to check settings via USB and notice a power error. Looking more closely, Volts show as 29.2V. Firstly the specs for this unit show 12-30v i believe so that should be ok, but the Unit shows error even though it behaves perfectly. Then i noticed if i switched off the battery charge the bolts dropped as you would expect to around 25/26v and the error on the AIS unit goes away. Sailing for the weekend and no issues at all. I'm not overly concerned since i dont use AIS while on shorepower other than for testing but curious as to why this is showing up as an error? |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] AIS 700 - Errors on power - nickvh - 10-01-19 04:45 PM
RE: [CA11] AIS 700 - Errors on power - Chuck - Raymarine - Moderator - 10-02-19, 02:54 PM
RE: [CA11] AIS 700 - Errors on power - nickvh - 10-04-19, 08:56 AM
RE: [CA11] AIS 700 - Errors on power - Chuck - Raymarine - Moderator - 10-04-19, 10:50 AM
|
User(s) browsing this thread: 1 Guest(s)