Raymarine forum / Raymarine Forums / Multifunction Displays v / [TG] [TG111] Depth transducer not visible on MFD

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG111] Depth transducer not visible on MFD
10-23-19, 01:29 AM
Post: #2
Tom - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,067
Joined: Nov 2017
Reputation: 7
RE: [TG111] Depth transducer not visible on MFD
Hello Mike,

Sorry you've not had a reply before now.
The ITC's transducers don't appear in the Fishfinder page's setup menu because that fishfinder page only handles fishfinder transducers as opposed to the instrument transducer connected to ITC5. You'll be able to see the ITC5 in the Axiom's diagnostics page, but nowhere on the Axiom will list the P17 depth transducer specifically.
The coming version Lighthouse v3.11 software will allow calibration of depth, speed and wind transducers connected to ITC5 (through Home > Settings > Network > (device list) ITC > Calibrate), but today you need an i70 instrument to calibrate ITC5. LH3.11 will be out very soon.

Regards,
Tom
Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [TG111] Depth transducer not visible on MFD - Tom - Raymarine - Moderator - 10-23-19 01:29 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication