Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Continuing problems with Axiom Fuel Manager
10-08-19, 08:33 AM (This post was last modified: 10-08-19 08:46 AM by Chuck - Raymarine - Moderator.)
Post: #5
RE: [CA11] Continuing problems with Axiom Fuel Manager
jfitch,

Thanks for the additional information. The Fuel Manager problems reported to date are few and most appear to be associated with the same Mercury engine gateway which has been employed within your system. The great data point which you have made twice now is that the i70's Fuel Manager feature does not appear to suffer the same issue. It would be interesting to know if the engine hours are correctly being reported within the i70S MFID.

We welcome your assistance in collecting data in support of solving this issue. Please respond the following:
- the system's Ethernet and SeaTalkng / NMEA 2000 device data (HOME->SET-UP->NETWORK->DIAGNOSTICS->PRODUCT INFO->SAVE DATA)
- NMEA 2000 log (OME->SET-UP->NETWORK->DIAGNOSTICS->NMEA DEVICES & MESSAGES->NMEA MESSAGES->RECORD->START RECORDING / STOP RECORDING) recorded while the vessel is underway and making way (30 seconds)
- NMEA 2000 log created when starting the vessels engines (15 seconds ... 5 seconds before, 10 seconds after engines have started.

Regarding the Fuel Manager Resets. The Trip (Day) and Trip (Month) are automatically reset based upon local date/time determined from the GPS data source for the system and the local time offset which has been configured by the user. Should the system feature more than one source of GPS data, then please ensure that a source has been manually selected for GPS, Date/Time, and Datum. The Trip (Manual) and Trip (Season) data items are designed to be manually using the corresponding Reset Trip options within the Fuel Manager.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Continuing problems with Axiom Fuel Manager - Chuck - Raymarine - Moderator - 10-08-19 08:33 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)