Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] ST50 wind transducer connects upside down

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ST50 wind transducer connects upside down
10-05-19, 01:20 PM (This post was last modified: 10-07-19 01:28 PM by Chuck - Raymarine - Moderator.)
Post: #1
fganz1944 Offline
Junior Member
**
 		Posts: 1
Joined: Oct 2018
Reputation: 0
Rainbow [CA11] ST50 wind transducer connects upside down
Several years ago I purchased a new st50 wind transducer as a spare to my existing Z135 unit. When I installed on mast, the connector with slot was upside down. Is this replacement a different model, and is there a way to rotate the transducer connector 180 degrees?
Find all posts by this user
Quote this message in a reply
10-07-19, 02:29 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] ST50 wind transducer connects upside down
Welcome to the Raymarine Forum fganz1944,

Unfortunately, we were unable to identify a reason for the stated issue. Please attach a photo of the wind transducer and its connector as well as that of the masthead socket.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication