[CA11] Upgrading piece by piece

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Upgrading piece by piece

10-10-19, 07:59 AM

Post: #3

tcoop

Junior Member

Posts: 5
Joined: Apr 2019
Reputation: 0

RE: [CA11] Upgrading piece by piece

Thanks Chuck!

Yes the DSM300 is working to the best of my knowledge. No there is not an Ethernet network switch at this time. There will be 2 Axiom 12 RV units and I expect to have Ethernet eventually to support my desire for redundancy.

To test the DSM300, will it plugin directly to the Axiom with the same cable that plugs into the E80 or do I need another cable interface? If the DSM300 wasn't working can the B744V connect to the Axiom albeit with less performance?

Thanks
Tim

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Upgrading piece by piece - tcoop - 10-08-19, 09:30 PM

RE: [CA11] Upgrading piece by piece - Chuck - Raymarine - Moderator - 10-09-19, 02:10 PM

RE: [CA11] Upgrading piece by piece - tcoop - 10-10-19 07:59 AM

RE: [CA11] Upgrading piece by piece - Chuck - Raymarine - Moderator - 10-10-19, 09:09 AM

RE: [CA11] Upgrading piece by piece - tcoop - 10-11-19, 08:05 AM

RE: [CA11] Upgrading piece by piece - Chuck - Raymarine - Moderator - 10-11-19, 08:45 AM

User(s) browsing this thread: 1 Guest(s)