Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] 2002 Era Electronics Integration To Sea Talk ng Radar & e125 MFD

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] 2002 Era Electronics Integration To Sea Talk ng Radar & e125 MFD
11-29-19, 01:30 PM (This post was last modified: 11-29-19 01:33 PM by Chuck - Raymarine - Moderator.)
Post: #12
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] 2002 Era Electronics Integration To Sea Talk ng Radar & e125 MFD
Walter,

As indicated within my earlier response and the FAQ found here, the devices on the SeaTalk bus should be disconnected from their present source of power and will instead be powered via the SeaTalkng / NMEA 2000 backbone via the SeaTalk to SeaTalkng Converter. The SeaTalkng backbone will in turn be powered via the SeaTalkng Power Cable supplied with the SeaTalk to SeaTalkng Converter Kit. In very simply systems, such as may be the case with yours, the SeaTalkng/NMEA 2000 backbone may consist of a SeaTalk to SeaTalkng Converter alone.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] 2002 Era Electronics Integration To Sea Talk ng Radar & e125 MFD - Chuck - Raymarine - Moderator - 11-29-19 01:30 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication