[CA11] Connecting seatalkNG to Axio Pro NMEA 2000

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Connecting seatalkNG to Axio Pro NMEA 2000

10-18-19, 10:43 AM

Post: #2

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: [CA11] Connecting seatalkNG to Axio Pro NMEA 2000

Welcome back to the Raymarine Forum Nick

The SeaTalkng Spur Cable which had been interface to the C140W should be unplugged from the C140W's SeaTalkng spur socket. An A06082 SeaTalkng (M) to DeviceNet (F) Adaptor will be fitted to the NMEA 2000 (DeviceNet (M)) socket of the Data Master Axiom Pro MFD. The aforementioned SeaTalkng Spur Cable will then be plugged into the spur (white) socket of the A06082 SeaTalkng (M) to DeviceNet (F) Adaptor.

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Connecting seatalkNG to Axio Pro NMEA 2000 - nickvh - 10-16-19, 08:54 PM

RE: [CA11] Connecting seatalkNG to Axio Pro NMEA 2000 - Chuck - Raymarine - Moderator - 10-18-19 10:43 AM

RE: [CA11] Connecting seatalkNG to Axio Pro NMEA 2000 - nickvh - 10-18-19, 10:59 AM

RE: [CA11] Connecting seatalkNG to Axio Pro NMEA 2000 - Chuck - Raymarine - Moderator - 10-18-19, 11:57 AM

User(s) browsing this thread: 1 Guest(s)