Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] ST6002 Alarm

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ST6002 Alarm
10-21-19, 07:03 PM (This post was last modified: 10-22-19 12:51 PM by Chuck - Raymarine - Moderator.)
Post: #1
Drew1711 Offline
Junior Member
**
 		Posts: 1
Joined: Oct 2019
Reputation: 0
[CA11] ST6002 Alarm
My ST6002 clutch engages and locks the wheel. It's stopped steering and I get an alarm that reads, "MOT STALL."

That alarm is not expalined in the manual. Can anyone tell me what it's trying to tell me? What do I need to fix it? Thanks in advance.
Find all posts by this user
Quote this message in a reply
10-22-19, 12:52 PM (This post was last modified: 10-22-19 12:53 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] ST6002 Alarm
Welcome to the Raymarine Forum Drew1711,

The reported autopilot error message is indicative of a failure within the autopilot's drive unit, necessitating that the drive unit be sent to Raymarine’s Product Repair Center to be bench checked / serviced or replaced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication