[CA] [CA11] Autopilot turns hard to port
|
10-30-19, 12:03 PM
(This post was last modified: 01-24-20 09:14 AM by Chuck - Raymarine - Moderator.)
Post: #2
|
|||
|
|||
RE: [CA11] Autopilot turns hard to port
Welcome to the Raymarine Forum Marc,
I would recommend that troubleshooting begin with the following: - verify that the hydraulic steering system has been fully bled of air. - verify that the batteries are in good shape and fully charged. If the batteries are older, consider having them load tested and replaced if found to fail such testing. - verify that the p70/p70R/p70S/p70RS autopilot control head has been updated with the latest available Raymarine product software update ... and if not, then update its software accordingly. - verify that the SPX autopilot course computer has likewise been updated with the latest available Raymarine product software update ... and if not, then update its software accordingly. - test the rudder reference transducer, not only for expected resistance, but also for dead spots ... replace if results are inconsistent with the referenced FAQ. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] Autopilot turns hard to port - Marc Winckers - 10-29-19, 03:19 PM
RE: [CA11] Autopilot turns hard to port - Chuck - Raymarine - Moderator - 10-30-19 12:03 PM
|
User(s) browsing this thread: 1 Guest(s)