Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] St 60 anemometer and direction broken off.

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] St 60 anemometer and direction broken off.
10-30-19, 12:31 PM (This post was last modified: 12-10-19 01:57 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] St 60 anemometer and direction broken off.
Welcome to the Raymarine Forum Duncan,

The ST60 Masthead Transducer's design features wires which pass from the transducer, through its aluminum arm (tube) the pins of the masthead transducer's plug. Please click here to view a FAQ addressing the pinout / wire colors associated with the masthead Transducer's plug. However, should the masthead transducer's arm separated from either the transducer or from the its plug, then it is recommended that the masthead transducer be sent to Raymarine’s Product Repair Center to be bench checked / serviced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] St 60 anemometer and direction broken off. - Chuck - Raymarine - Moderator - 10-30-19 12:31 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication