Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Transducer
11-22-19, 01:19 PM (This post was last modified: 11-22-19 03:14 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Transducer
There seem to be some confusion on the dead rise specs on the RV-312 transducer ,could you possibly clear this up for me ?


Attached File(s) Thumbnail(s)
           
Find all posts by this user
Quote this message in a reply
11-22-19, 03:33 PM (This post was last modified: 11-22-19 03:33 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] Transducer
Welcome to the Raymarine Forum Jarmstrong,

Please accept our apologies for the conflicting specification. The correct specification and as indicated below is that the RV transducers will support +/- 6 degrees of deadrise from their stated degree of offset (ex. 12 degree RV transducers will support hulls having deadrise from 6 to 18 degrees in the installation location)

[Image: attachment.php?aid=3812]


Attached File(s) Thumbnail(s)
   
Visit this user's website Find all posts by this user
Quote this message in a reply
11-29-19, 10:24 AM (This post was last modified: 11-29-19 01:23 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] Transducer
Thank you Chuck.
Find all posts by this user
Quote this message in a reply
11-29-19, 01:24 PM
Post: #4
RE: [CA11] Transducer
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)