Raymarine forum / Raymarine Forums / Product Selection Assistance v / A98 communication to old Raytheon products?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
A98 communication to old Raytheon products?
03-30-16, 08:54 AM
Post: #1
Va-Jim Offline
Junior Member
**
 		Posts: 5
Joined: Mar 2016
Reputation: 0
A98 communication to old Raytheon products?
Getting prepared to take the plunge on purchasing the A98 MFD. Am hopeful but doubt it will communicate with my old stuff that came with boat. Raytheon R10XX radar? SportPilot+ autopilot? Just curious if possible. Thanks-Jim
Find all posts by this user
Quote this message in a reply
03-30-16, 10:36 AM (This post was last modified: 03-30-16 10:38 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: A98 communication to old Raytheon products?
Welcome to the Raymarine Forum Jim,

While the a/c/e/eS/gS-Series MFDs may not be interfaced to the R10XX radar, they may be interfaced to the SeaTalk (via a SeaTalk to SeaTalkng Converter) or NMEA 0183 interface of a SportPilot autopilot.
Find all posts by this user
Quote this message in a reply
03-30-16, 05:15 PM
Post: #3
Va-Jim Offline
Junior Member
**
 		Posts: 5
Joined: Mar 2016
Reputation: 0
RE: A98 communication to old Raytheon products?
Thank you for the information. So I can communicate with the SportPilot+ which is good news and in the future upgrade the radar. Thanks again, Jim.
Find all posts by this user
Quote this message in a reply
03-31-16, 11:18 AM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: A98 communication to old Raytheon products?
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication