Raymarine forum / Raymarine Forums / Radar v / [CA] [CA11] E-120 with radar broken

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] E-120 with radar broken
06-10-19, 05:50 PM (This post was last modified: 06-12-19 09:32 AM by Chuck - Raymarine - Moderator.)
Post: #1
Francesca Offline
Junior Member
**
 		Posts: 1
Joined: Jun 2019
Reputation: 0
[CA11] E-120 with radar broken
If the soft key stand-by transmit disapeared on my E-120, is it because the radar is broken?
Regards
Martin
Find all posts by this user
Quote this message in a reply
06-12-19, 09:40 AM (This post was last modified: 06-12-19 09:41 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] E-120 with radar broken
Welcome to the Raymarine Forum Martin,

Pressing and releasing the E-Series Classic MFD's (v5.69) POWER button should change the MFD's function key labels to provide options for TX/STANDBY, Scanner ON/OFF, and Palette DAY/NIGHT options. If the Scanner is OFF, then the TX/STANDBY option will be greyed out (desensitized). If pressing and releasing the MFD's POWER button does not cause the MFD's function keys to be so labeled, then it would indicate a failure of the MFD's keypad PCB. In the case of the latter, the MFD would need to be replaced, as Raymarine's Product Repair Center can no longer provide parts and service for the E-Series Classic MFDs.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication