[TG] [TG11] GPS Data Conflict
|
05-26-20, 08:05 AM
(This post was last modified: 06-01-20 12:50 AM by Tom - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[TG11] GPS Data Conflict
I have an Axiom 9 MFD and a Camino AIS unit that is tied into the Seatalk NG network. The system worked fine until recently, when I upgraded to the most recent Lighthouse 3 software version and removed an external GPS antenna (which I thought was unused) from the system. The Axiom 9 now loses satellite fix. When I look at the satellite data page, the Axiom 9 is switching between the internal GPS receiver and the Camino AIS GPS antenna and losing signal in the process. I have the button selected for the Axiom to use its internal satellite receiver and that is the data source selected for GPS data. If I disconnect the Camino from the Seatalk NG system, the problem is resolved - the Axiom connects with up to 18 satellites and holds the fix. How can I get the Axiom to ignore the GPS data coming from the Camino AIS unit? Thanks.
|
|||
06-01-20, 12:57 AM
Post: #2
|
|||
|
|||
RE: [TG11] GPS Data Conflict
Hello Claygr,
That's exactly what should happen if you make a manual data source selection. Could you toggle the GPS data source selection between manual and auto and back to manual again, to just to make sure that manual definitely is being used, and then if you're still having problems, post back here:
Regards, Tom Raymarine since 1999. Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras Location: Sydney, Australia. Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests. |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)