Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] Axiom 9 interface to ST60 instruments

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom 9 interface to ST60 instruments
01-07-20, 05:02 PM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Axiom 9 interface to ST60 instruments
Kirk,

Fortunately, the 150G Autopilot Course Computer is compatible with Raymarine's SeaTalk to SeaTalkng Converter. Please click here to view a FAQ addressing how the legacy equipment would be interfaced to the Axiom MFD via a SeaTalk to SeaTalkng Converter. Although not considered to be a best installation practice, if seeking to minimize the amount of rewiring, then the ST6001 and ST60 instruments may remain daisy chained to one another and to the currently used SeaTalk port of the course computer. The course computer's second SeaTalk port may then be used to interfaced it to the SeaTalk (yellow) socket of the SeaTalk to SeaTalk Converter ... pay heed to the direction within the FAQ to not connect the SeaTalk cable's red lead to the autopilot course computer's red SeaTalk terminal.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Axiom 9 interface to ST60 instruments - Chuck - Raymarine - Moderator - 01-07-20 05:02 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication