The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Fishfinders v / [CA] [CA11] CP570 to 3KW Transducer Upgrade from 2KW

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] CP570 to 3KW Transducer Upgrade from 2KW
03-12-20, 02:05 PM (This post was last modified: 03-12-20 02:11 PM by Chuck - Raymarine - Moderator.)
Post: #1
Fish On Offline
Member
***
 		Posts: 108
Joined: May 2016
Reputation: 0
[CA11] CP570 to 3KW Transducer Upgrade from 2KW
With the Axiom Pro RVX connected to a CP570, I currently have a R109LH 2kw and I'm looking to upgrade to an inhull R599LH 3kw.
Will the CP570 work on an inhull R599LH 3kw to its fullest potential, or does it max out at 2kw, and I would be better off with the R111LH 2kw inhull transducer.
Reason I would go with the 3kw opposed to a 2kw is that my hull is between 1.25", and 1.5" thick. Waiting to hear from Airmar regarding the "power loss" with the thickness of my fiberglass hull.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] CP570 to 3KW Transducer Upgrade from 2KW - Fish On - 03-12-20 02:05 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication